The highly flexible controller has a Linux kernel and is for custom applications in C programmable. In addition, data logging is provided without Borders: The internal micro controller with 1 GB RAM, 4 GB flash is equipped with a battery buffered real time clock and a programmable watchdog function. Over the Ethernet interface can data be transferred with 1 Gig Ethernet, TCP / IP or UDP online at 100 kHz (16 variables), in addition, this interface can also be used as a web client or Email. With two USB 2.0 ports, there is the possibility to save data with 1 MB/s (256,000 measurements/s) secure. The USB 2.0 interface can be used for keyboard, mouse or modem connections or can be used as an interface to synchronize with an external GPS receiver. Alternatively, the new Power Controller offers a SD Card interface for data logging or for firmware update. Optional for the Q.station a 3.5" full VGA display is available with touch screen The new Test controller can be used as EtherCAT EtherCAT slave or master. It is equipped with a 1-Gig Ethernet, two CAN and two full USB interfaces. When logging readings in motor vehicles, it is also frequently necessary to read or write signals from/to the vehicle such as control, status or measured data. The new Q.station test controller offers two CAN interfaces for reading and writing such data. The CAN data is logged synchronously with the signals recorded by the Q.bloxx with maximum jitter of 0.1 µs and transferred to the automation system in the form of a data string.