Fieldbus Converters
Protocol and Fieldbus Converters
With fieldbus converters PLC and automation systems of different manufacturers can communicate with each other. Typical application is connecting a CANopen actuator to a Profibus factory bus.
Via protocol converters different actuators and I/O units can be connected to various manufacturers' automation systems. Typical production application is a machine in EtherCAT system communicating with a process automation system in Profinet network.
-
Fieldbus to IoT GatewayPrice
HMS AB7560-F
Anybus X-gateway IIoT-CANopen Slave- Protocol: CANopen
- Protocol 2: MQTT, OPC UA
- Input voltage: 9-36 Vdc
- Oper. temperature -25...60 °C
800,00 € -
Device to Fieldbus ConverterPrice
HMS AB7329-B
Anybus X-gateway CANopen - PROFINET IRT- Protocol: CANopen
- Protocol 2: Profinet
- Input voltage: 24-24 Vdc
- Oper. temperature -25...55 °C
1 031,00 € -
Fieldbus to Fieldbus GatewayPrice
HMS AB7897-F
Anybus X-gateway CANopen Slave-CC-Link Slave- Protocol: CANopen
- Protocol 2: CC-Link
- Input voltage: 24-24 Vdc
- Oper. temperature -25...65 °C
800,00 € -
Fieldbus to Fieldbus GatewayPrice
HMS AB7895-F
Anybus X-gateway CANopen Slave-Modbus-RTU Slave- Protocol: CANopen
- Protocol 2: Modbus RTU
- Input voltage: 24-24 Vdc
- Oper. temperature -25...65 °C
800,00 € -
Fieldbus to Fieldbus GatewayPrice
HMS AB7894-F
Anybus X-gateway CANopen Slave-CANopen Slave- Protocol: CANopen
- Protocol 2: CANopen
- Input voltage: 24-24 Vdc
- Oper. temperature -25...65 °C
800,00 € -
Fieldbus to Fieldbus GatewayPrice
HMS AB7691-F
Anybus X-gateway CANopen Slave-EtherCAT Slave- Protocol: CANopen
- Protocol 2: EtherCAT
- Input voltage: 24-24 Vdc
- Oper. temperature -25...65 °C
800,00 € -
Device to Fieldbus ConverterPrice from
Hilscher NT 50-CO-RS
netTAP 50 CANopen - RS 232/422/485- Protocol: CANopen
- Protocol 2: RS232/422/485 (Serial)
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
351,00 € -
Device to Fieldbus ConverterPrice from
Hilscher NT 50-CO-EN
netTAP 50 CANopen - Ethernet- Protocol: CANopen
- Protocol 2: EtherCAT, EtherNet/IP, Modbus/TCP, Powerlink, Profinet
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
351,00 € -
Fieldbus to Fieldbus GatewayPrice from
Hilscher NT 100-CO-DP
netTAP 100 CANopen - PROFIBUS-DP- Protocol: CANopen
- Protocol 2: Profibus
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
752,00 € -
Fieldbus to Fieldbus GatewayPrice from
Hilscher NT 100-CO-DN
netTAP 100 CANopen - DeviceNet- Protocol: CANopen
- Protocol 2: DeviceNet
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
752,00 € -
Fieldbus to Fieldbus GatewayPrice from
Hilscher NT 100-CO-CO
netTAP 100 CANopen - CANopen- Protocol: CANopen
- Protocol 2: CANopen
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
752,00 € -
Fieldbus to Fieldbus GatewayPrice from
Hilscher NT 100-CO-CC
netTAP 100 CANopen - CC-Link- Protocol: CANopen
- Protocol 2: CC-Link
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
752,00 € -
Fieldbus to Fieldbus GatewayPrice from
Hilscher NT 100-CO-RS
netTAP 100 CANopen - RS232/422/485(pot.frei)- Protocol: CANopen
- Protocol 2: RS232/422/485 (Serial)
- Input voltage: 24-24 Vdc
- Oper. temperature 0...60 °C
600,00 €
Shop By
